Caliber/Gauge
223 Rem
Barrel Length
11.5"
Action
Semi
Front Sight
None
Rear Sight
None
Color
Black
Finish
Anodized
Material
Aluminum
Handed
Right
Springfield Armory's SAINT AR-15 series expands to include the SAINT Victor SBR, featuring an 11.5" CMV government profiled 1:8 twist barrel that is Melonite finished inside and out for the ultimate in corrosion resistance. This configuration was selected as the best balance between length and ballistic performance of the 5.56 cartridge.
The SAINT Victor SBR, with its forged lower receiver, provides superior accuracy thanks in part to a free-float handguard featuring Springfield's rock-solid proprietary attachment system. With four attachment points anchoring it to the barrel nut, this M-Lok compatible handguard was designed to withstand the hard use of law enforcement and military operations. Under the handguard is Springfield's pinned multi/mode adjustable gas block for suppressed or unsuppressed use.
Forged from aircraft grade 7075 T6 aluminum and Type III hard coat anodized, the lower receiver is equipped with the Accu-Tite tension system, which reduces movement between the upper and lower receiver. No corners were cut on the MPT (magnetic particle tested) enhanced M16 bolt carrier group the heart of any premium AR. This BCG is finished with super-hard Melonite and carries a 9310 steel bolt.
The GI trigger on the SAINT Victor SBR is nickel boron coated for a smooth, grit-free feel, and the Bravo Company stock, pistol grip and Magpul Gen M3 PMAG are right at home on this combat grade short-barreled rifle. A single-sided 90 degree safety, GI charging handle and A2 flash hider complete the package.
For those looking for a light, tight and quick-handling short-barreled rifle, the SAINT Victor SBR is the ultimate hard use carbine.
Caliber: 5.56x45mm (.223 REM)
Length: 27.5"
30.75"
Weight: 5 lbs 9 oz
Upper Receiver: SA Forged Type III Hard Coat Anodized, 7075 T6 Aluminum Flat Top w/ Forward Assist & M4 Feed Ramps
Lower Receiver: SA Forged Type III Hard Coat Anodized, 7075 T6 Aluminum w/ Accu-Tite Tension System & Receiver End Plate w/ QD Swivel Attachment
Barrel: 11.5" CMV, Melonite Internally & Externally, A2 Flash Hider / 1:8 Twist
Gas System: SA Proprietary Low Profile Carbine Length Adjustable Gas Block
Trigger: SA Proprietary, Nickel Boron Coated GI Style
Sights: Not Included
Trigger Guard: Bravo Company
Pistol Grip: Bravo Company Mod 3
Handguard: Full Length Aluminum Free Float Handguard w/ M-Lok Attachment Points
Butt Stock: Bravo Company
Buffer Assembly: Carbine "H" Heavy Tungsten Buffer
Receiver Extension: Mil-Spec Carbine, 7075 T6 Type III Hard Anodized Aluminum
Charging Handle: GI Style
Bolt Carrier Group: Enhanced M16, MPT, Melonite Finish w/ 9310 Steel Bolt
Magazine: 1
30 Round Magpul PMAG
Case: Soft Rifle Case
The SAINT Victor SBR, with its forged lower receiver, provides superior accuracy thanks in part to a free-float handguard featuring Springfield's rock-solid proprietary attachment system. With four attachment points anchoring it to the barrel nut, this M-Lok compatible handguard was designed to withstand the hard use of law enforcement and military operations. Under the handguard is Springfield's pinned multi/mode adjustable gas block for suppressed or unsuppressed use.
Forged from aircraft grade 7075 T6 aluminum and Type III hard coat anodized, the lower receiver is equipped with the Accu-Tite tension system, which reduces movement between the upper and lower receiver. No corners were cut on the MPT (magnetic particle tested) enhanced M16 bolt carrier group the heart of any premium AR. This BCG is finished with super-hard Melonite and carries a 9310 steel bolt.
The GI trigger on the SAINT Victor SBR is nickel boron coated for a smooth, grit-free feel, and the Bravo Company stock, pistol grip and Magpul Gen M3 PMAG are right at home on this combat grade short-barreled rifle. A single-sided 90 degree safety, GI charging handle and A2 flash hider complete the package.
For those looking for a light, tight and quick-handling short-barreled rifle, the SAINT Victor SBR is the ultimate hard use carbine.
Caliber: 5.56x45mm (.223 REM)
Length: 27.5"
30.75"
Weight: 5 lbs 9 oz
Upper Receiver: SA Forged Type III Hard Coat Anodized, 7075 T6 Aluminum Flat Top w/ Forward Assist & M4 Feed Ramps
Lower Receiver: SA Forged Type III Hard Coat Anodized, 7075 T6 Aluminum w/ Accu-Tite Tension System & Receiver End Plate w/ QD Swivel Attachment
Barrel: 11.5" CMV, Melonite Internally & Externally, A2 Flash Hider / 1:8 Twist
Gas System: SA Proprietary Low Profile Carbine Length Adjustable Gas Block
Trigger: SA Proprietary, Nickel Boron Coated GI Style
Sights: Not Included
Trigger Guard: Bravo Company
Pistol Grip: Bravo Company Mod 3
Handguard: Full Length Aluminum Free Float Handguard w/ M-Lok Attachment Points
Butt Stock: Bravo Company
Buffer Assembly: Carbine "H" Heavy Tungsten Buffer
Receiver Extension: Mil-Spec Carbine, 7075 T6 Type III Hard Anodized Aluminum
Charging Handle: GI Style
Bolt Carrier Group: Enhanced M16, MPT, Melonite Finish w/ 9310 Steel Bolt
Magazine: 1
30 Round Magpul PMAG
Case: Soft Rifle Case
